Differences

This shows you the differences between two versions of the page.

--- public:protocols:python-digi-xbee [2020/05/10 15:46] – timdv91
+++ public:protocols:python-digi-xbee [2023/02/26 04:51] (current) – external edit 127.0.0.1
@@ Line 3: / Line 3: @@
 Usage of digi.xbee library for wireless data communication:
 Source: [[https://xbplib.readthedocs.io/en/latest/getting_started_with_xbee_python_library.html]]
+<code bash Install > pip3 install digi-xbee </code>
+<code bash fix install error> pip3 install --upgrade setuptools </code>
 ===== Typical required imports: =====
-<code python>
+<code python imports>
 import time
 import sys
@@ Line 14: / Line 16: @@
 ===== Typical instantiation of local device: =====
-<code python>
+<code python init local devices>
 # instantiate XbeeDevice object:
 #device = XBeeDevice("/dev/ttyS2", 9600)
@@ Line 23: / Line 25: @@
 </code>
-===== Typical instantiation of a remote device & remote pin control: =====
+===== Typical instantiation of a remote device: =====
-<code python>
+<code python init remote-devices>
 # Instantiate a remote XBee device object.
 remote_device = RemoteXBeeDevice(device, XBee64BitAddress.from_hex_string("0013A200xxxxxxxx"))
-remote_device.set_io_configuration(IOLine.DIO11_PWM1, IOMode.DIGITAL_OUT_HIGH)
 </code>
+===== remote pin control: =====
+<code python set IO>
+remote_device.set_io_configuration(IOLine.DIO11_PWM1, IOMode.DIGITAL_OUT_HIGH)
+</code>
 ===== Typical serial data transmission: =====
   * Send text to remote receiver
   * receive text back from remote receiver
-<code python>
+<code python serial data communication>
 # Send data using the remote object.
 #state = device.send_data(remote_device, "Hello XBee!")
@@ Line 68: / Line 73: @@
 </code>
-At end of program:
+===== At end of program: =====
-<code python>
+<code python close port>
 device.close()
 </code>