Differences

This shows you the differences between two versions of the page.

--- xnorit:public:dependencies:xnorbee [2021/03/07 15:13] – [Automated, using Python3:] timdv91
+++ xnorit:public:dependencies:xnorbee [2023/02/26 04:55] (current) – external edit 127.0.0.1
@@ Line 46: / Line 46: @@
 ===== Downloads: =====
-Download full slaves library code + example: {{ :xnorit:public:dependencies:xnorbee:xnorbeeslavetest.rar |}}
+Download full slaves library code + example: {{ :xnorit:public:dependencies:xnorbee:xnorbeeslave.rar |}} \\
+Dependencies: install 'xbee-arduino library' by Andrew Rapp (tested with v0.6.0) using the library manager.
 \\
@@ Line 94: / Line 95: @@
 ==== Manual, using XCTU: ====
-{{ :h2:daq:daqv2:embeddedsoftware:master:xctu_xnorbeemaster_framegeneratorexample.png?400|}}
+{{ :xnorit:public:dependencies:xnorbee:xctu_xnorbeemaster_framegeneratorexample.png?400|}}
 Reading and/or writing data to the slave device can be done from the XCTU software inside the console mode. \\
@@ Line 102: / Line 103: @@
   * **Frame type:** \\ 0x10 - Transmit Request
   * **64-bit dest.address:** \\ <enter Mac from slave receiver>
-  * **RF data:** \\ <enter data in the correct [[h2:daq:daqv2:embeddedsoftware:xbeelibrary_v0.1#Master protocol|Master protocol]]>
+  * **RF data:** \\ <enter data in the correct [[xnorit:public:dependencies:xnorbee#Master protocol|Master protocol]]>
 <WRAP center round info 50%>
@@ Line 168: / Line 169: @@
 //Note that the returned values inside 'state' and 'xbee_message' contain rather difficult to read dictionary and object data. For easy data access combine this class with the XnorBeeMaster class. //
+== Read or write IO-Lines: ==
+If you need to read or set an IOLine in/out-put, this can be done as follow.
+<code python>
+from XnorBee.XnorBee import XnorBee
+from digi.xbee.devices import IOMode
+from digi.xbee.io import IOLine
+# Get the basic functionality using the XnorBee class:
+xbe = XnorBee("COM13", 9600)
+rZBid = xbe.SetRemoteZigbeeDevice("0013A20041AE5856")
+# PIN / IOLine interactions:
+rZBDEV = xbe.GetRemoteZigbeeDevice(rZBid)  # Get the remote device object from the xbe object using the remote devices ID.
+rZBDEV.set_io_configuration(IOLine.DIO10_PWM0, IOMode.DIGITAL_IN)  # Configure the pin as an input.
+io_state = rZBDEV.get_dio_value(IOLine.DIO10_PWM0)  # Read the pin state HIGH or LOW
+print(io_state)
+</code>
 \\
@@ Line 174: / Line 193: @@
 === XnorBeeMaster class ===
-The XnorBeeMaster class contains the higher level functions for the [[h2:daq:daqv2:embeddedsoftware:xbeelibrary_v0.1#XnorBee class|XnorBee]] class. \\
+The XnorBeeMaster class contains the higher level functions for the [[xnorit:public:dependencies:xnorbee#XnorBee class|XnorBee]] class. \\
 This class can be used to:
-  * Write data to a slave device following the correct [[h2:daq:daqv2:embeddedsoftware:xbeelibrary_v0.1#Master protocol:|Master protocol]].
+  * Write data to a slave device following the correct [[xnorit:public:dependencies:xnorbee#Master protocol:|Master protocol]].
-  * Read data from a slave device, following the correct [[h2:daq:daqv2:embeddedsoftware:xbeelibrary_v0.1#Master protocol:|Master protocol]].
+  * Read data from a slave device, following the correct [[xnorit:public:dependencies:xnorbee#Master protocol:|Master protocol]].
 == Initialization & usage: ==
@@ Line 203: / Line 222: @@
 === Download: ===
-Download full Masters library code + example: {{ :xnorit:public:dependencies:xnorbee:xnorbee_master_.rar | XnorBee(Master) }}
+Download full Masters library code + example: {{ :xnorit:public:dependencies:xnorbee:xnorbeemaster.rar |}} \\
 dependencies: [[https://xbplib.readthedocs.io/en/latest/getting_started_with_xbee_python_library.html]]
@@ Line 212: / Line 231: @@
 ReceiveData function should be updated to hold an timeout delay in the future!
 </WRAP>