Differences

This shows you the differences between two versions of the page.

--- xnorit:public:summary:rpizerocamera [2024/10/13 11:16] – created timdv91
+++ xnorit:public:summary:rpizerocamera [2024/10/13 11:25] (current) – [3D printing] timdv91
@@ Line 2: / Line 2: @@
 I setup a small RPI-zero camera, in order to know what's happening at my front-door and drive-way.
-The setup runs on [[https://github.com/motioneye-project/motioneyeos|motionEyeOS]] and is only available in my LAN network. Any movement inside the camera's view is automatically detected and starts recording to the local SD-card. I added an additional script, that uploads the first video frame as image to a private Discord server as backup. This also provides an update, whenever someone's at the door when we're not home.
+===== Software =====
-{{ :xnorit:public:summary:rpizerocam:ksnip_20241013-130511.png?400|}}
+{{ :xnorit:public:summary:rpizerocam:ksnip_20241013-130511.png?200|}}
+The setup runs on [[https://github.com/motioneye-project/motioneyeos|motionEyeOS]] and is only available in my LAN network. Any movement within the camera's view automatically triggers a video recording, saved on the local SD card. I also added an additional custom script to the setup, that uploads an image file to a private Discord server as backup. This also provides an update on our phones, whenever someone's at the door when we're not home.
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+===== 3D printing =====
+{{ :xnorit:public:summary:rpizerocam:ksnip_20241013-132002.png?400|}}
+A custom 3D printed enclosure was designed in FreeCad. I designed the setup with a flowerpot mount, as can be seen in the image above. Note that the screws are also 3D printed, which is especially recommended when clamping them onto a glass flowerpot.
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+\\
+===== Result =====
+The image quality is not superb, but it does get the job done as I often open the front-door before people have ringed the doorbel.