Differences

This shows you the differences between two versions of the page.

--- xnorit:public:summary:zigbeecarportcontroller [2024/10/12 19:29] – [Carport controller] timdv91
+++ xnorit:public:summary:zigbeecarportcontroller [2024/10/13 14:50] (current) – [Result] timdv91
@@ Line 2: / Line 2: @@
 I designed a custom wireless ZigBee carport controller, in order to minimize risk of accidentally locking ourselves out of the house. I decided to use the XBEE3 MMT chip, as these are compact, easy to use and receive regular firmware updates from the manufacturer Digi. They also support security features and have AES encrypted communication.
-{{:xnorit:public:summary:ksnip_20241012-151854.png?290 |}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-151854.png?290 |}}
-{{:xnorit:public:summary:vid_20241012_191756.webm?500|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:vid_20241012_191756.webm?500|}}
 ===== Prearrangement =====
@@ Line 17: / Line 17: @@
-{{:xnorit:public:summary:ksnip_20241012-152141.png?800|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-152141.png?800|}}
-{{:xnorit:public:summary:ksnip_20241012-152048.png?275|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-152048.png?275|}}
-{{:xnorit:public:summary:ksnip_20241012-152005.png?415|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-152005.png?415|}}
-{{:xnorit:public:summary:ksnip_20241012-152018.png?400|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-152018.png?400|}}
-{{:xnorit:public:summary:ksnip_20241012-151836_1.png?290|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-151836_1.png?290|}}
-{{:xnorit:public:summary:ksnip_20241012-151847.png?400|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-151847.png?400|}}
@@ Line 28: / Line 28: @@
 I 3D printed a small enclosure, in order to cleanly mount the circuitboard to my carport. The enclosure itself is printed using Prusament Galaxy black, the top-lid is printed using fillamentum transparent filament. I also printed the screws in the same transparent filament, as this looks cleaner than metal screws.
-{{:xnorit:public:summary:ksnip_20241012-183340.png?425|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-183340.png?425|}}
-{{:xnorit:public:summary:ksnip_20241012-151854.png?370|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-151854.png?370|}}
 <WRAP center round tip 60%>
@@ Line 39: / Line 39: @@
 ===== Result =====
-The module was attached to the carports cover, using the 3D printed screws. I drilled 5 holes through the cover, 2 for the screws and three for all the wires. The green LED looks rather fancy when it's dark, even why only consuming 0.7mA at 3.3V ...
+The module was attached to the carports cover, using the 3D printed screws. I drilled 5 holes through the cover, 2 for the screws and three for all the wires. The green LED looks rather fancy when it's dark, even when only consuming 0.7mA at 3.3V ...
-{{:xnorit:public:summary:ksnip_20241012-211226.png?400|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-211226.png?400|}}
-{{:xnorit:public:summary:ksnip_20241012-211248.png?400|}}
+{{:xnorit:public:summary:zigbeecarportcontroller:ksnip_20241012-211248.png?400|}}
 <WRAP center round todo 60%>