You can visit the Grafana dashboard at https://grafana.xnorit.be
Select a panel to view in the “0K_FreezerMonitoring” folder, as shown in the image.

A panel named with 'Light' provides the user with a quick and simple to read overview, with the drawback that it only contains an limited amount of data and information.

Each monitored freezers is provided with a small indication of the current temperature. Beneath the temperature is a small chart visible. If a temperature is out of range (As seen for freezer T_209), both temperature and chart change color.

The default color setting is:

• temperature below -100 = Blue
• temperature in-between -100 and -60 = Green
• temperature in-between -60 and -50 = Orange
• temperature in-between -50 = Red

Below the temperatures there is a field visible containing “Freezer health”. If a freezer supports this function, the freezer health will detect interruptions in freezer operation (breakdown/failure/AC loss). Using the default settings, this detection happens within 1 minute. The shown percentage is a calculated average over the selected time-span inside Grafana, see <color #ed1c24>panel settings</color> for more information.

A panel named with 'Full' provides a more thorough overview of each recorded freezer data, with the drawback of lessened readability.

A panel named 'ALL' contains a 'Light' representation of all connected freezers at a given site.